The CK502 and CK503 kits employ round pea bulbs to achieve a realistic incandescent bulb look. Bulb wires are pulled through a hole behind the fixture and attached to the tape run on the opposite side of the wall or on the floor above. 

$7.10
$5.98
$8.98
$9.98
$7.98
$8.98

Add a soft glow to any miniature fireplace.  Our glowing embers come equipped with a special orange-colored bulb to give the log set a true-to-life glowing appearance.  This unit will not flicker the dollhouse lights, works with any 12-volt system and requires no separate transformer.  The included bulb is an easily replaceable screw-base type with a Hong Kong type plug attached to the small gauge, 24" long power cord.

Height: 2-1/8"
Width: 2-3/8"
Accommodates three lamps
Requires 2 "C" batteries

Use this 115 vac lighting set for backlighting any vignette box or miniature room. Locate the 4-watt bulb behind a back wall to create a completely hidden indirect light source. The plug and in-line switch are removable and allow the power cord to be easily pulled through a small feed hole. Overall length 6'. No transformer necessary.
 

If you're looking for a quick and easy indirect lighting source, the CK1047-1 Candelabra Socket is the answer. With this special socket you can add a light at any point on the CK1047 Vignette Light Set or on a standard 18 gauge lamp cord.

The CK1047-1 allows the connection of one, two or more bulbs on a cord. This is the ideal solution if more light is required for backlighting a miniature room but only one cord is available. No transformer is required, only a 115 vac wall outlet. Each socket comes with its own 115 vac, 4-watt, low heat bulb. The easy slide together assembly makes installation a snap. Complete instructions included with each package.