Cir-Kit Concepts Wiring Products Page 1 Dollhouse Wiring from Fingertip Fantasies Dollhouse Miniatures

Dollhouse WIRING PRODUCTS Page 1
from FINGERTIP FANTASIES Dollhouse Miniatures

	Thru Splice (CK1006) $ 1.96 A specially cut splice for thru-wall and thru-floor applications. As its name implies this splice provides a means of interconnecting tape runs on opposite sides of ceilings, floors, or walls and eliminates the need for discrete wires, soldering or special interconnects. Simply drill two holes, push pigtails through and make brad connections to tape runs on each side of the partition. Made of 5/8" wide tape, the overall splice length is approximately 2-1/2" with the exposed pigtails measuring 1-1/2".

	Solder Spool (4 ft.) (CK1033-1) $2.98 Use this high-quality solder in conjunction with our CK1053 soldering iron for all your soldering needs. The 60% tin, 40% lead alloy composition assures a low-melting point and a strong metal-to-metal contact. Convenient dispenser pack.

	Black Heat Shrink Tubes, 1/16" I.D. (6 pack) (CK1033-4) Black Heat Shrink Tubes, 3/32" I.D. (6 pack) (CK1033-5) Black Heat Shrink Tubes, 3/16" I.D. (6 pack) (CK1033-6)	$1.56 $1.75 $1.98
Use the larger heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to 1/2 the original size when heated. The rated wire sizes and typical applications are as follows: CK1033-6 (3/16" inside diameter) 18 gauge lamp cord wire. CK1033-5 (3/32" inside diameter) 20 gauge, i.e., CK1008 series lead-in wire. CK1033-4 (1/16" inside diameter) 24 gauge, i.e., CK203-1 speaker-type wire.

	Clear Heat Shrink Tubes (12 pack) (CK1033-3) $2.98 Green Heat Shrink Tubes (12 pack) (CK1033) $2.96
	These small shrink tubes provide an excellent means of connecting 32-gauge wires such as GOW bulb wires together without the use of solder. The shrink tube is simply slide over one of the wires to be joined, the bared wires twisted together, and the shrink tube slid back over the connection. Once in place a very small amount of heat from a hair dryer, match or candle may be used to shrink the tube and create a tight, insulated connection for the wires. The CK1033 and CK1033-3 heat shrink tubes are some of the smallest made, both in diameter and wall thickness. The inside diameter is .040" or just slightly larger then the insulation on a GOW bulb wire. The wall thickness is approximately .002" (the thickness of transparent tape). The end result is an extremely small diameter splice once the tube has been heated, giving a very unobtrusive electrical connection. Each tube measures approximately 1/2" long.

Wiring Kits	Transformers	Outlet, Plug, & Switch Products	Tools
Lamps & Fixtures	Lights Bulbs	Tape & Lead Wires	Books & Videos
Wiring Products	Hardware Products	Lighting Accessories	Fireplace Grates