SPOTLIGHT BULB

5.95

This CK1010-10 Spotlight Bulb is a one of a kind bulb. Not only does it provide an extremely bright and focused beam of light, but also swivels in a 360 degree arc and allows complete 180 degree front-to-back movement. It may be pointed in any direction and at any angle to highlight a miniature work of art or provide a localized area of lighting. The large glass envelope makes possible a highly-focused lens and creates an extremely long-lasting bulb; in excess of 5,000 hours.

The bulb works on any 12-volt system, measures approximately 7/8" in length by 3/8" in diameter, and draws 180 ma of current. The bulb comes with attached 12" white wires and may be snapped in and out of its holder for easy replacement. All metal parts are nickel plated.

PEA BULBS

12V Frosted Pea Bulb (CK1010-9)    
12V Clear Pea Bulb (CK1010-9A)    

$2.48
      $2.48

FLUORETTE BULBS

12V Clear Fluorette Bulb (CK1018-1)
12V Frosted Fluorette Bulb (CK1018-2)   
12V Showcase Clear Bulb (super bright) (CK1018-3)

$2.48
$2.48
$2.48

Ideal for back lighting or illuminating miniatures, these fluorescent shaped bulbs provide a unique and effective indirect lighting source. Available in either frosted or clear tubular glass. The frosted bulb gives a uniform and diffused light over a large area whereas the clear bulbs display a brighter and more localized illumination. Fuse-type snap-in/snap-out construction allows easy bulb installation and replacement.

Each bulb measures approximately 1/4" in diameter by 1-1/2" in length. Power consumption for the CK1018-1 and -2 bulbs is 70 to 80 ma when connected across a 12-volt source. The extra-bright Showcase Bulb draws approximately 220 ma of current. All fluorettes are warranted for 3,000 hours when used with a Cir-Kit Concepts' 12-volt transformer. Mate with CK1019 and CK1019-1 sockets. 2,500 hour bulb life.

FLUORETTE SOCKETS

CK1019

CK1019-1

Fluorette Socket with nails (CK1019)                    
Fluorette Socket with solder eyes (CK1019-1)

$2.96
$3.48

These sockets are designed specifically for the CK1018 series of fluorette bulbs.
 The clip-in type construction allows simple bulb installation and replacement.

The CK1019 is equipped with imbedded nails which automatically make electrical contact with the tape run when pounded in. The CK1019-1 has solder eyes for the connection and soldering of wires at each end. Sockets measure approximately 3/16" wide by 1-5/8" long.

AXIAL BULBS

$2.48
$2.48 

These 1.5 volt axial bulbs are a fraction the size of our popular micro bulbs and meet the challenge of even the smallest lighting projects. Ideal as light sources for both 1/4" and 1/2" scale miniatures.

Both size axial bulbs may be operated in parallel either from a 1.5 volt battery pack for from our CK1009G 1.5 volt transformer. The larger diameter CK1010-19 bulbs are electrically balanced and may be operated 12 in series across a 12-volt transformer.

The bulbs may also be used in model railroading for locomotive number boards or classification lights as well as interior lighting for smaller scale cars. 1,000 hour bulb life.

Wiring Kits

Transformers

Outlet, Plug, &
Switch Products

Tools

Books &
Videos