|1/8" Brass Brads (approx. 300) (CK1021)
1/8" Brass Brads (approx. 60) (CK1021-1)
1/4" Brass Brads (approx. 100) (CK1022-1)
|Our 1/8" brads are some of the smallest in the world. When folded corners in a tape run are not desired these small, precisely made brads provide a very unobtrusive and effective means of establishing electrical connection. Their small size permits usage on even the thinnest of wood walls and nearly disappear from view when pounded into a conductive tape run. Measure approximately 1/8" by .024". The 1/4" brads are made of solid brass and may be used for dozens of electrical and woodworking projects! These also measure approximately .024" in diameter. Included in each CK1003 outlet and CK1011 switch package.|
Small Hollow Eyelets (20 pack) (CK1023)
Small Hollow Eyelets (110 pack) (CK1023-1)
|These hollow eyelets provide an easy and convenient
alternative to the "brass bradding" of tape runs. Their larger size and ease of
handling greatly simplifies the electrical connection process. They may be used as a
substitute for 1/8" brass brads in almost all applications. To install, first make a
starter hole using either our No. 55 drill bit or the CK1044 Awl. Next, place the eyelet
in the hole and push in for a quick and absolutely positive electrical connection.
Eyelets are brass and measure approximately 1/8" long with an inside diameter of .044" and outside diameter of .056". Packaged in quantities of 20 and 110. Illustrated instructions included in each package.
|Large Hollow Eyelets (CK1023-2)||$1.18|
|Most imported lamps come equipped with a larger but
not to scale Hong Kong type plug. For those not wishing to discard this plug, our CK1023-2
eyelets provide a simple alternative. First, using the plug attached to the lamp as a
guide, mark two holes on the tape run. Then, using either the CK1044 Awl or a No. 52 drill
bit, make two starter holes and insert eyelets. The lamp plug may now be directly
inserted, making for an attractively flush and easy to install outlet.
Eyelets are brass and measure approximately 3/16" long with an inside diameter of .054" and outside diameter of .071". Packaged in quantities of 20. Illustrated instructions in package.
|#0 Wood Screws (20 pack) (CK1045)
These small threaded wood screws are designed primarily to hold the CK1007 Junction Splice in place but are also useful in any miniature project requiring small fasteners. The screws are approximately 7/16" long and .060" in diameter.
|Flanged Spade Lugs, Insulated (6 pack) (CK1102)||
|The CK1102 spade lugs may be attached to a wide range of 18-24 gauge wire sizes and used for connecting wires either to transformer or terminal block screws. Designed for both crimping and soldering to stripped wires.|
|Lamps & Fixtures||Lights Bulbs||Tape & Lead Wires|
|Wiring Products||Hardware Products||Lighting Accessories||Fireplace
|Miniature Ramblings||Sweet William's Dinner Table|
|Angels||Cookware||Garden||Miniature Books||Tea Sets|
|Animals||Dollhouses||General Store||Miniature Tools||
Miniatures from England
returns must be made within
|Order Form 100% safe|